San Fernando Valley Air Conditioning: Programmable Thermostats

A programmable thermostat offers a lot of flexibility in its temperature settings. American Air Conditioning and heating can help you choose which one to get and help you program it. We have specialized in San Fernando Valley Air Conditioning and Heating for over 30 years!

Using a programmable thermostat, you can adjust the times you turn on the heating or air conditioning according to a pre-set schedule. As a result, you don’t operate the equipment as much when you are asleep or when the house is not occupied. This is important to your San Fernando Valley Air Conditioning and Heating bill because it gets very hot here in the valley and this will help you save on energy bills.

Programmable thermostats can store and repeat multiple daily settings (six or more temperature settings a day) that you can manually override without affecting the rest of the daily or weekly program. When shopping for a programmable thermostat, be sure to look for the ENERGY STAR label.

General Thermostat Operation- San Fernando Valley Air Conditioning

You can easily save energy in the winter by setting the thermostat to 68°F while you’re awake and setting it lower while you’re asleep or away from home. By turning your thermostat back 10°–15° for 8 hours, you can save about 5%–15% a year on your heating bill—a savings of as much as 1% for each degree if the setback period is eight hours long. The percentage of savings from setback is greater for buildings in milder climates than for those in more severe climates.

In the summer, you can follow the same strategy with central San Fernando Valley air conditioning, too, by keeping your house warmer than normal when you are away, and lowering the thermostat setting to 78°F (26°C) only when you are at home and need cooling. Although thermostats can be adjusted manually, programmable thermostats will avoid any discomfort by returning temperatures to normal as you wake or return home.

A common misconception associated with thermostats is that a furnace works harder than normal to warm the space back to a comfortable temperature after the thermostat has been set back, resulting in little or no savings. This misconception has been dispelled by years of research and numerous studies. The fuel required to reheat a building to a comfortable temperature is roughly equal to the fuel saved as the building drops to the lower temperature. You save fuel between the time that the temperature stabilizes at the lower level and the next time heat is needed. So, the longer your house remains at the lower temperature, the more energy you save.

Choosing and Programming a Programmable Thermostat for your San Fernando Valley Air Conditioning System

Most programmable thermostats are either digital, electromechanical, or some mixture of the two. Digital thermostats offer the most features in terms of multiple setback settings, overrides, and adjustments for daylight savings time, but may be difficult for some people to program. Electromechanical systems often involve pegs or sliding bars and are relatively simple to program.

When programming your thermostat, consider when you normally go to sleep and wake up. If you prefer to sleep at a cooler temperature during the winter, you might want to start the temperature setback a bit ahead of the time you actually go to bed; you probably won’t notice the house cooling off as you prepare for bed. Also consider the schedules of everyone in the household; is there a time during the day when the house is unoccupied for four hours or more? If so, it makes sense to adjust the temperature during those periods.

Other Considerations- San Fernando Valley Air Conditioning

The location of your thermostat can affect its performance and efficiency. Read the manufacturer’s installation instructions to prevent “ghost readings” or unnecessary furnace or air conditioner cycling. Place thermostats away from direct sunlight, drafts, doorways, skylights, and windows. Also make sure your thermostat is conveniently located for programming.

If you need help installing or programming your programmable thermostat, or need Air Conditioning and Heating Repair in the San Fernando Valley, contact us at +1 (310) 419-8902.